Garmin 910XT User Manual
Page 27
ANT+ Sensors
25
2
Select Speed Source > Foot Pod.
About Foot Pod Calibration
Calibrating your foot pod is optional and
can improve accuracy. There are three
ways to adjust the calibration: distance,
GPS, and manual.
Calibrating Your Foot Pod by
Distance
For best results, the foot pod should
be calibrated using the inside lane of
a regulation track. A regulation track (2
laps = 800 m) is more accurate than a
treadmill.
1
Select MODE > Settings > run
Settings > Foot Pod > Calibrate >
Distance
2
Select a distance.
3
Select Continue > STArT to begin
recording.
4
Run or walk the distance.
5
Select STOP.
Calibrating Your Foot Pod by gPS
You must have GPS signals to calibrate
the foot pod using GPS.
1
Select MODE > Settings > run
Settings > Foot Pod > Calibrate >
gPS�
2
Select Continue > STArT to begin
recording.
3
Run or walk approximately
1000 m.
The Forerunner informs you that you have
traveled far enough.
Calibrating Your Foot Pod Manually
If your foot pod distance seems slightly
high or low each time you run, you can
manually adjust the calibration factor.
1
Select MODE > Settings > run
Settings > Foot Pod > Calibration
Factor.
2
Adjust the calibration factor.
• Increase the calibration factor if
your distance is too low.
• Decrease the calibration factor if
your distance is too high.