Weight scales, Power zones, see – Garmin 910XT User Manual

Page 29

ANT+ Sensors

For calibration instructions specific to your

power meter, refer to the manufacturer’s

instructions.

Select MODE > Settings > Bike

Settings > bike name > ANT+Power.

Select Yes in the Power meter

present field.

Select Calibrate.

Keep your power meter active by

pedaling until the message appears.

Setting Your Power Zones

Before you configure power zones, you

must be in bike sport mode.
You can set seven custom power zones

(1=lowest, 7=highest). If you know

your functional threshold power (FTP)

value, you can enter it and allow the

Forerunner to calculate your power zones

automatically.

Select MODE > Settings > Bike

Settings > bike name > Power

Zones.

Select an option:
• Select % FTP to view and edit the

zones as a percentage of your

functional threshold power.

• Select watts to view and edit the

zones in watts.

Non-Zero Averaging for Power Data

The non-zero data-averaging setting

is available if you are training with an

optional power meter. The default setting

is to include zero values that occur when

you are not pedaling.
To turn the non-zero averaging on or off,

select MODE > Settings > Bike Settings

> Data Averaging > Power.

Data recording

When a third-party power meter (

page 26

)

is paired, the Forerunner records points

every second. Recording points every

second uses more of the available

memory on the Forerunner, but creates a

very accurate record of your ride.

weight Scales

Using the weight Scale

If you have an ANT+ compatible weight

scale, the Forerunner can read the data

from the weight scale.

Select MODE > Settings > System >

weight Scale ANT+.