GE IM4A - Manual (Page 4)

4
Problem Possible Causes What To Do
Automatic icemaker Freezer compartment • After installing the kit, allow the refrigerator to completely
does not work too warm. cool down for 24 hours. Once the compartment is cool,
the icemaker will begin ice production.
Icemaker is not turned on. • Move the icemaker
power switch to the
ON position.
Icemaker is not plugged • If using a power cord adapter, make sure that it is fully
in correctly. connected. Also check that the icemaker cord plug is fully
inserted into the socket. See Plug in the icemaker.
Water line kinked. • Check that the plastic water
line running from the valve
to the water tube inlet is not
kinked. See Connect the
water line. A kink in the
water line will restrict flow
to the water line.
Water supply turned off or • After installing the kit, make sure the house water supply
not connected. to the refrigerator has been turned on.
Piled up cubes in the storage bin • Level cubes by hand.
cause the icemaker to shut off.
Water valve is not plugged in • Check that the valve wire
correctly. adapter is completely
plugged onto the male
connector plug and the
terminals on the water valve.
See Attach the water valve.
Before you call for service…
Troubleshooting Tips
Save time and money! Review the following chart first
and you may not need to call for service.
Clip
Restraints
onto
Locking
Tabs
Locking
Tabs
Hook
Adhesive-backed
Fasteners for
Water Tube
Male
Connector
Plug
Valve
Terminals
Feeler
Arm
Power
Switch
Icemaker
(Appearance may vary)