GE GFK-1541B - Manual (Page 68)

GFK-1541B 3-1
Programming SRTP Channel Commands
This chapter describes how to program PLC to PLC communications over the Ethernet network
using SRTP Channel commands. To program Modbus/TCP Channel commands, see chapter 4.
ƒ The Communications Request
ƒ The COMMREQ Function Block and Command Block
ƒ SRTP Channel Commands
ƒ Status Data
ƒ Controlling Communications in the Ladder Program, which includes an example
Note
This chapter applies only to PLCs being used as client PLCs to initiate
SRTP/TCP/IP communications. No programming is required for SRTP server
operations.
3
Chapter