Genie GTH-1056 - Manual (Page 50)

OPERATION
BRAKE ON
SWAY CONTROL
PUMP OFF
HEATER HEADLIGHT LEFT STABILIZER RIGHT STABILIZER
BLIN
ENGINE
WARNING
Slower speeds should be used whenever transporting a load.
Always bring the machine to a complete stop before reversing
the transmission control lever (A). Failure to do so can result in
damage to the load, the machine and/or bystanders.
Always keep the boom retracted to ensure greater stability.
Always place the load in the center and completely against the
back of the fork frame. By doing so greater stability will result.
IMPORTANT: Never attempt to use the forks and/or attach-
ments for prying wedged or frozen loads free. Damage to the
load, pallet and/or machine could result.
TRANSPORTING A LOAD
4 - 12
A