Genie GTH-1056 - Manual (Page 35)

CONTROLS AND INSTRUMENTS
FRONT STABILIZERS
3 - 11
BRAKE ON
(C) LETTER VIS IBLE = 3,000 LBS
(D ) LETTER VISIBLE = 2,000 LBS
P/N 3-1483 0
(1.22)
METER FEET (6.10) 28 (8.54) 24 (7.32) 20
4
!"#"$ & '( )*"#+
455 NORTH SUPERIOR AVENUE
MACHINE ON A FIRM, LEVEL
SURFACE WITH UNDAMAGED,
PROPERLY INFLATED CALCIUM
CAPACITY IS PER ANSI B56.6
LOAD LIMITS / HORIZONTAL BOOM
(B) LETTER VISIBLE = 4,000 LBS
OR OPTIONAL FOAM FILLED TIRES. CHLOR IDE SOLUTION FILLED TIRES
RATED LIFT CAPACITIES ARE WITH :
LAST FULLY VISIBLE LETTER
(A) LETTER VISIBLE = 6,000 LBS R ETRACTED = 8,000 LBS
REAR AXLE LOCK-UP ENGAGED.
(.61 METERS) LOAD CENTER WITH
MANUFACTURER'S RECOMMENDED STABILITY TESTS USING STANDARD (1.22x1.22x1.22 METERS). LOAD HOMOGENEOUS CUBES 4x4x4 FT.
P.O. BOX 790
PHONE 906-353-6675
FAX 906-353-7543
CAPACITIES AT 24 INCH STANDARD FORK FRAME.
BARAGA, MICHIGAN 49908
12 (3.66) 16
(14.64) 48
METER FEET (6.10) 28 (8.54) 24 (7.32) 20
32
20
24 (7.32)
(8.54) 28
(9.76)
44 (13.42) 40
36 (10.98)
(12.20)
0
(4.88)
(4.88) 12 (3.66) 8 16 (6.10) 20 4 (1.22) (2.44)
(4.88) 12 (3.66) 16 (6.10) 20
SWAY CONTROL
PUMP OFF
HEATER HEADLIGHT LEFT STABILIZER RIGHT STABILIZER
BLIN
ENGINE
LEFT
STABILIZER
RIGHT
STABILIZER
LEFT FRONT
STABILIZER DOWN
LEFT FRONT
STABILIZER UP
The stabilizer controls (B) and (C) are located on the dash
panel.
The front stabilizers are used when there is a need for added
machine stability when lifting or lowering a load.
While sitting in the operator's seat the left front stabilizer arm
is lowered or raised using the left stabilizer control (B), and the
right front stabilizer arm is lowered or raised using the right
stabilizer control (C).
To lower the left front stabilizer arm press the lower part of the
left stabilizer control. To raise the left front stabilizer press the
upper part of the left stabilizer control.
To lower the right front stabilizer arm press the lower part of
the right stabilizer control. To raise the right front stabilizer
press the upper part of the right stabilizer control.
To lower both the left and the right front stabilizers at the same
time, press the lower part of both the left stabilizer control and
the right stabilizer control
RIGHT FRONT
STABILIZER UP
RIGHT FRONT
STABILIZER DOWN
,-
)./ (
B C
UP
DOWN