Genie GTH-1056 - Manual (Page 49)

OPERATION
Transporting a load with the boom extended and the boom
angle indicator arrow (D) reading more than 0 degrees could
cause a roll over hazard.
The load should be kept as low to the ground as possible while
traveling. Always move a loaded machine with the boom angle
indicator arrow (D) at 0 degrees or less.
The forks should always be tilted back slightly during trans-
portation to ensure stability of the load.
TRANSPORTING A LOAD
WARNING
At no time should any load be suspended from the forks by
use of chains, ropes, straps etc. If a load must be suspended
the use of a truss (jib) boom is mandatory. Proper rigging
procedures should always be followed.
WARNING
4 - 11
D