Genie GTH-1056 - Manual (Page 45)

OPERATION
PUMP OFF
BRAKE ON
CONTROL
SWAY
HEATER HEADLIGHT HYDRAULICS WIPER AUXILIARY LEFT
STABILIZER
RIGHT
STABILIZER
BEFORE OPERATING THE FORKLIFT
CAUTION
If any gauge reading does not fall within the set tolerances the
machine must be repaired before operation.
Check the dash mounted gauges for logical readings.
(1) Fuel 1/2 to Full
(2) Transmission Oil Temp. 180 F to 200 F
(3) Transmission Oil PSI. 240 to 280 PSI
(4) Volt 12 to 14
(5) Engine Water Temp. 180 F to 200 F
(6) Engine Oil PSI 40 to 80 PSI
Operate the joystick controller momentarily in all directions.
STANDARD JOYSTICK FUNCTIONS
BUTTON DEPRESSED FUNCTIONS
A - Boom Down
B - Boom Up
C - Boom Out
D - Boom In
E - Boom Down and Out
F - Boom Up and In
G - Boom Up and Out
H - Boom Down and In
A - Tilt Forward
B - Tilt Back
4 - 7
1 2 3
4 5 6