GE WBVH6240 - Manual (Page 43)

– 43 –
Grasp and unsnap the door cover from the door
frame.
Lift the door glass out of the door frame.
4.
5.
Door Glass
Note: Place the door on a soft protected fl at surface
so that the door glass faces up. (The door should
rest on the handle side)
Remove the 8 Phillips-head screws that hold the
door cover and door strike to the door frame. 3.
Remove the 5 Phillips-head screws from the
protect cover and ring.
Release the 2 tabs that hold the protect cover
and ring from the door frame.
6.
7.
Slide the protect cover and ring away from the
handle side of the door frame.
Note: The door handle and door frame are replaced
as an assembly. (Part # WH46X10125)
8.
Plastic Window
Tab
Tab
Door Handle
Door Frame