GE WBVH6240 - Manual (Page 24)

– 24 –
From inside the cabinet, lift and push forward to
release the bottom tab from the front bracket. 5.
Bottom Tab
Side Tab
Push the control panel towards the left, then
release the side tab.
Disconnect the 9 wire harnesses from the
control panel.
7.
8.
Lift the top edge of the panel to disengage the 3
tabs that hold the top of the panel in place. 6.
Remove the 4 Phillips-head screws that attach
the top of the control panel to the control panel
cover. 4.
Remove the single Phillips-head screw from the
control panel dispenser recess. 3.
Lock Tab
Control Panel
The control panel is held in place with 5 Phillips-
head screws and 5 tabs.
To remove the control panel assembly:
Remove the top panel. (See Top Panel .)
Pull the dispenser out to the stop position. Press
down on the lock tab. Pull the dispenser out.
1.
2.
Rear View