Genie SUPERLIFT 97550 - Manual (Page 7)

Part No. 97550 Genie Superlift Advantage 5
Operator's Manual Third Edition • Third Printing
SAFETY RULES
Damaged Machine Hazards
Do not use a damaged or
malfunctioning machine.
Do not use a machine with a
worn, frayed, kinked or damaged
cable.
Do not use a machine with less
than 4 wraps of cable on the
winch drum when the carriage is
fully lowered.
Conduct a thorough
pre-operation inspection prior to
each use.
Be sure all decals are in place and legible. See
Decals section.
Be sure that the operator's manual is complete,
legible and in the storage container located on the
machine.
Maintain proper lubrication on the winch. See Genie
Superlift Parts and Service Manual for details. Do
not allow oil or grease on braking surfaces.
Do not use any type of lubrication on the column
surfaces.
Improper Use Hazard
Never leave a Genie Superlift unattended with a
load. Unauthorized personnel may attempt to
operate the machine without proper instruction,
creating an unsafe condition.
Decal Legend
Genie product decals use symbols, color coding
and signal words to identify the following:
Safety alert symbol—used to alert
personnel to potential personal
injury hazards. Obey all safety
messages that follow this symbol
to avoid possible injury or death.
Red—used to indicate the
presence of an imminently
hazardous situation which, if not
avoided, will result in death or
serious injury.
Orange—used to indicate the
presence of a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
Yellow with safety alert symbol—
used to indicate the presence of a
potentially hazardous situation
which, if not avoided, may cause
minor or moderate injury.
Yellow without safety alert
symbol—used to indicate the
presence of a potentially
hazardous situation which, if not
avoided, may result in property
damage.
Green—used to indicate operation
or maintenance information.