Gateway 960 - Manual (Page 59)

54
Chapter 4: Installing Components
www.gateway.com
12
If your heat sink has a fan, plug the fan into the connector on the system
board next to the heat sink.
13
If you have installed a new processor into the lower (processor 2) slot for
the first time, you also need to install a voltage regulator for the processor.
If you ordered the processor from Gateway, it came with a new voltage
regulator. For instructions on installing a voltage regulator, see
“Installing
a voltage regulator” on page 55 .
14
Follow the instructions in “Closing the server case” on page 31 .
Warning Only one voltage regulator should be installed for each
processor.
Processor 1
fan connector
Processor 2
fan connector