Gateway 960 User Manual

Page 47

Text mode
Original mode

Chapter 4: Installing Components

www.gateway.com

Pull the drive tray’s lever away from the server, then pull the tray straight
out of the server.

If you are replacing a hard drive, remove the four screws that secure the
hard drive to the drive tray, then remove the drive from the tray.

- OR -

If you are adding a new drive, remove the bag taped to the inside of the
drive tray, then remove the screws from the bag.

Caution

Before you remove a failed drive, use the appropriate
software and utilities installed on the server to stop all
activity on the failed drive. Instructions for using the
software are provided by the software manufacturer.
Failure to do so may destroy the data on the drive.

Screw