Sound, Sound tv – Gateway AR-230 User Manual
Page 55
51
Sound
www.gateway.com
Sound
No sound plays while playing media through the recorder.
■
Make sure that all audio cables are securely plugged in.
■
If any audio or speaker cables are damaged, replace them.
■
Make sure that the volume is turned up on your TV.
■
Make sure that the recorder’s audio settings match your TV and audio
system settings.
■
The recorder may be in Pause, Slow Motion, or Fast Forward/Fast Reverse
mode. Press the button on the remote control to return to normal
playback mode.
I keep hearing a loud hum or noise.
■
Make sure that all components in your audio system are securely
plugged in.
■
Make sure that you keep your audio system’s cables away from a
transformer or motor and that you keep them at least 10 feet away from
a TV or fluorescent lights.
■
The plugs and jacks may be dirty. Unplug them, then wipe them clean with
a cloth slightly moistened with isopropyl alcohol.
■
Clean the DVD.
TV
No picture appears on my TV.
■
Make sure that the video cables are securely plugged into the recorder and
the TV.
■
Make sure that you have made only one video connection. If you are using
S-Video or component video, make sure that you have not plugged in the
yellow video connector on the composite audio/video cable.
■
If the video cables are damaged, replace them.
■
Make sure that the TV System option in the Setup menu is set correctly.
■
Make sure that video is set to the correct mode. Press the
Source
button
on the remote control until a picture is visible.