Garmin GPSMAP 2108 - Manual (Page 9)

GPSMAP ® 2008/2108 Owner’s Manual 5
g
eTTing
s
TarTed
Viewing System Information
You can view your unit’s software version, basemap
version, and unit ID number. You may need this
information to update the system software or purchase
additional map data information.
From the Home screen, select
Configure > system >
system Information .
Restoring Factory Settings
You can restore your unit to the original factory
settings.
CAuTION: This procedure deletes any information
you have entered.
To restore factory settings:
1. From the Home screen, select Configure > System
> System Information�
2. Select Factory Settings .
3. Select Yes to restore all factory settings. Otherwise,
select No to cancel.
Inserting and Removing SD Cards
Your unit supports Secure Digital (SD) cards. Insert
an optional BlueChart ® g2 SD card to view defailed
bluechart and land information. Insert blank SD cards
to transfer data such as waypoints, routes, and tracks to
another compatible Garmin unit or a PC. The SD card
slot is located on the bottom-right corner of the unit.
To insert the SD card, press it in until it clicks.
Card label
GPSMAP 2008/2108
To remove the SD card, press in on the SD card. The
card pops out.