Gateway ALR 9000 - Manual (Page 32)

16 Gateway ALR 9000 User’s Guide
CPUs and CPU Slots
The standard system is equipped with one Pentium Pro chip installed on
CPU card
A which is installed in CPU card slot A . In CPU card slot B , a
terminator card is installed in place of an optional second CPU card B .
Symmetrical Multi-Processing
Symmetrical Multi-Processing SMP enables all CPUs in the system
simultaneously to service interrupts, access system memory, and perform I/
O operations. If your operating system does not support SMP, the system
adjusts the processing mode to Asymmetrical, meaning only the first CPU
accepts I/O interrupts, while the successive CPUs accept only
interprocessor interrupts.
Voltage Regulator Module
Each CPU must have a dedicated voltage regulator module (VRM) which
adjusts the voltage supplied to the CPU.
Floppy Drive Controller
The floppy drive controller can support up to two devices of 1.44-MB or
2.88-MB format.
Figure 5: CPU Card
USRGUIDE.BOO Page 16 Thursday, July 16, 1998 10:41 AM