Set present time of day timer settings required – GE PNSF31Z01 User Manual

Page 9

NOTE:

If the words

PRESENT TIME

do not show in the display, press

the

SELECT

button until they do.

Press the UP or DOWN button to set. The UP button moves

the display ahead; the DOWN moves the time backward. If the

present time is between noon and midnight, be sure PM
shows . If the present time is between midnight and
noon, be sure AM shows .
When the present time shows in display, press

SELECT

to set.

Upon installation and after an extended power outage. See the

Program Memory

section.

■

When the transformer is plugged into the electrical outlet
12:00 AM is flashing and

PRESENT TIME

shows in the display

area. Program the timer as instructed below. If

SR- -

is flashing,

use the UP button to set the correct

code as follows:

SR22.

you pass by the correct code number, use the DOWN button.
Then, press the

SELECT

button and program the timer below.

…

If the wrong SR code shows for your model,

see

Manually Initiated

Electronic Diagnostics

section.

■

A “beeper” sounds while pressing buttons for timer
programming. One beep signals a change in the timer display.
Repeated beeps mean the timer will not accept a change from
the button you have pressed and you should use another button.

■

To set the timer, you will use the UP, DOWN and

SELECT

buttons.

Customer Ser

vice

oubleshooting T

ips

Operating Instr

uctions

Safety Infor

mation

SELECT

RECHARGE TONIGHT

RECHARGE NOW

TOUCH

HOLD

TIME

HARDNESS

SmartWater Softening System

Profile

Set Present Time of Day

Timer Settings Required