GE PNSF31Z01 - Manual (Page 11)

During normal operation, the present time of day and AM or
PM shows in the time display area . When the demand
computer determines a regeneration is needed,
RECHARGE
TONIGHT begins to flash in the display, along with the present time.
RECHARGE TONIGHT flashes until the next regeneration
start time, then changes to RECHARGE NOW,
which flashes until the regeneration is over.
Sometimes, a manually started regeneration (recharge) may be
desired or needed.
Two examples:
■ You have used more water than usual (house guests, extra
washing, etc.) and you may run out of soft water before the
next regeneration.
■ You did not refill the storage tank with salt.
Use one of the following features to start a regeneration
immediately, or at the next preset regeneration start time.
RECHARGE TONIGHT
Touch (do not hold) the TOUCH or HOLD button. RECHARGE
TONIGHT flashes in the time display area. A regeneration will occur
at the next preset regeneration start time. If you decide to cancel
this regeneration, touch the same button once more.
RECHARGE NOW
Press and hold the TOUCH or HOLD button until RECHARGE NOW
starts to flash in the time display area. The water softening system
begins an immediate regeneration and, when over in about two
hours, you will have a new supply of soft water. Once started, you
cannot cancel this regeneration.
Customer Ser
vice
Tr
oubleshooting T
ips
Operating Instr
uctions
Safety Infor
mation
11
Normal Operation, Timer Displays
Feature: Optional Recharge Controls