Gateway E-9232T - Manual (Page 65)

www.gateway.com
59
LED information
See the following table for a description of this server’s LEDs and the information they provide:
LED Name Function Location Color Description
ID Aid in server
identification Control panel and
back of system
board Yellow
(front)
Blue (back) On - Server identification
enabled
System Fault Visible fault
warning Control panel Red Off - System normal
Blinking - Non-critical system
fault
On - Critical system fault
(system needs to be shut down
and serviced)
Hard drive tray
LEDs Indicate drive
status and activity On each hard drive
tray Blue or red Blue (On) - Hard drive present
Blue (Blinking) - Hard drive
activity
Red (On) - Hard drive fault
Red (Blinking) - Hard drive
rebuilding
Off - No hard drive access
NIC status LEDs Identify NIC states Control panel and
back I/O panel
RJ-45 connectors Blue (front)
Green/
Orange
(back)
Blue (On) - Link
Blue (Blink) - Activity
Off - No link
LED 1 Green (On) - NIC linked
LED 1 Green (Blinking) - NIC 1
Gbps activity
LED 1 (Off) - No link
LED 2 Orange (On) Link speed
1 Gbps
LED 2 Green (On) - Link at
100 Mbps
LED 2 Green (Off) - Link at
10 Mbps
Power LED Identify the power
state of the system Control panel Blue Off - Power is off
Blinking - Power saving state
(S1, S3, or S4)
On - Power is on
AC power LED Identify power
supply fault Power supply
module Green or
Orange Green (On) - Power supply good
and receiving power
Orange (On) - Power supply
critical event causing shutdown
Orange (Blinking) - Close to
protection threshold or over
within 15 seconds
Off - Power supply not receiving
power