Gateway E-9232T - Manual (Page 26)

CHAPTER 4: Installing Components
20
5 Swing the side panel away from the computer.
6 Lift the panel away from the server and place it out of the way.
Removing the bezel assembly
To remove the bezel assembly:
1 Follow the instructions in “Opening the server case” on page 19 .
2 After removing the side panel, press the three black plastic tabs (positions indicated by
the arrows) to release the right side of the bezel.
3 Swing the right side of the bezel out until the left side of the bezel can be disengaged
from the left side of the computer, then remove the bezel.