Plain continuous stock – Genicom PC4 User Manual
Page 61
EasyCoder PC4 User’s Guide
49
Appendix B — Media Specifications
Plain Continuous Stock
The EasyCoder PC4 can use continuous stock without any detection
slots or black marks. The printer must be set for continuous stock by the
Q
command (see Intermec ESim v6.XX, Programmer’s Reference Manual).
The length of each copy is decided by the size of the print image and any
additional media feed is decided by the Q command.
Continuous stock cannot be used in the Test (Dump) Mode.
← a → Tag or strip width:
Maximum:
116.0 mm
(4.57 inches)
Minimum:
25.0 mm
(1.00 inches)
a
CONTINUOUS STRIP