Chart conversion (from enc format to senc format) – Furuno FEA-2100 User Manual
Page 7
7
4. Chart Conversion (from ENC format to SENC format)
The chart data in a CD-ROM (ENC format) must be converted to SENC format in order to display
it on the ECDIS. Note that the conversion takes several hours.
1. Press the [CHART PLAN] key to display the
menu.
2. Place the cursor on [Load] - [View loaded CD
Catalogue] and press the [SELECT] key.
3. Choose the catalogue name from the [CD] box.
4. Place the cursor on the [Groups] button in the
[Chart Selection] window and press the
[SELECT] key.
5. Place the cursor on the catalogue name entered
at the [Group Select] window and press the
[SELECT] key. The chart numbers chosen
above are displayed in black as shown in the left
figure.
[View loaded CD Catalogue]
[Load]
[CD] box
[Group Select] window
[Groups] box
[Chart Selection]
[OK] button
Group name ebtered.
- MARINE RADAR 1953C (100 pages)
- GP-1650D (2 pages)
- GP-1650WD (96 pages)
- GP-1650W (96 pages)
- NAVNET 1943C-BB (92 pages)
- GD-3300 (137 pages)
- DUAL GPS GP-150-DUAL (130 pages)
- GP-1650WF (113 pages)
- CH-300 (124 pages)
- NX-300 (65 pages)
- NX-300 (2 pages)
- GP-1850WDF (115 pages)
- GP-3500 (192 pages)
- GP-1850WD (44 pages)
- GP-1850W (98 pages)
- GP-1850WD (98 pages)
- GP-1850W (4 pages)
- GP-1850W (98 pages)
- INTERFACE UNIT IF-2500 (12 pages)
- GP-31 (2 pages)
- GP-33 (98 pages)
- GP-7000 (28 pages)
- GP-7000 (2 pages)
- GP37 (2 pages)
- GP-90 (36 pages)
- CI-35 (69 pages)
- GP-1850DF (63 pages)
- GP-1850F (110 pages)
- GP-30 (2 pages)
- FCV-30 (110 pages)
- BACK GP-80 (103 pages)
- LC-90 MARK-II (2 pages)
- GP-1650W (44 pages)
- DD-80 (119 pages)
- RP-250 (73 pages)
- GP-1650 (94 pages)
- GP-185F (4 pages)
- GP-1600F (97 pages)
- GP-1850D (94 pages)
- GP-7000F (132 pages)
- GP-7000F (52 pages)
- GP-36 (81 pages)
- GP-150-DUAL (123 pages)
- GP-80 (37 pages)
- 1650WDF (4 pages)