Furuno FEA-2100 - Manual (Page 6)

6
e. Place the cursor on the [Add Frame] button
and press the [SELECT] key.
f. Rotate the trackball to place the cursor inside
the chart cell frame desired and press the
[SELECT] key. Repeat this to select all
desired areas.
The selected areas are shown in blue.
g. After selecting all areas desired, place the
cursor on the [DONE] button and press the
[SELECT] key.
h. Confirm that the chart numbers selected are
shown in the [Inside] box in the [Group]
window and then place the cursor on the
[Save] button and press the [SELECT] key.
i. Place the cursor on the [Close] button and
press the [SELECT] key to close the [Group]
window.
[Add Frame] button
[Done] button
[Save] button
[Group] window
[Inside]
[Close] button