FUJITSU SCANSNAP! FI-4110EOX2 - Manual (Page 42)

26
4. Adjust the Side guides to the document width.
Move the Side guides so that there is no gap between the document edges and the Side
guides.
If there is a gap between the document edges and the guides, the scanned images may be
skewed.
HINT
If you use the stacker, scanned document sheets do not become separate
when they have passed through the scanner.
Use the document stack as follows.
1. Pull out the stacker towards you while holding it by its handle.
2. Insert your finger into the indent and lift up to extend the stacker exten-
sion.
Handle
Indent