FieldServer Kahl HCS-R - Manual (Page 7)

FS-8700-127 Hanning & Kahl HCS-R Manual Page 7 of 17
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.FieldServer.com
Tel: 408 262-2299 Fax: 408-262-2269 Toll_Free: 888-509-1970 email: [email protected]
5.2 Client Side Node Parameters
Section Title
Nodes
Column Title Function
Legal Values
Node_Name Provide name for Node Up to 32 alphanumeric characters
Node_ID HCS-R station address of physical server Node 240 (Protocol limit)
Protocol Specify protocol used
HCS-R
HCSR
H&K HCS-R
Connection Specify which port the device is connected to the FieldServer P1-P8 2
Example
// Client Side Nodes
Nodes
Node_Name , Node_ID , Protocol , Connection
PLC 1
, 240 , HCS-R , P1
5.3 Client Side Map Descriptor Parameters
5.3.1 FieldServer Related Map Descriptor Parameters
Column Title Function Legal Values
Map_Descriptor_Name Name of this Map Descriptor Up to 32 alphanumeric characters
Data_Array_Name
Name of Data Array where data is to be
stored in the FieldServer 0 to (Data_Array_Length-1) as specified
in Section 4.
Data_Array_Offset Starting location in Data Array
0 to (Data_Array_Length-1) as specified
in Section 4.
Function Function of Client Map Descriptor RDBC, Passive_Client
2 Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction manual for details of the ports available
on specific hardware.