FieldServer Kahl HCS-R - Manual (Page 3)

FS-8700-127 Hanning & Kahl HCS-R Manual Page 3 of 17
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.FieldServer.com
Tel: 408 262-2299 Fax: 408-262-2269 Toll_Free: 888-509-1970 email: [email protected]
1 HANNING & KAHL HCS-R DESCRIPTION
The Hanning & Kahl HCS-R driver allows the transfer of data from devices over RS-232 HCS-R protocol. Data is read
from HCS-R and current data stored in a specified memory area. The driver can store the data with its loop data
status distinct memory areas depending on wheter the data is on loop or from loop. The driver is based on section
10.5 of Hanning & Kahl - part number 40801121. The FieldServer can act as a Client or Server.
Max Nodes Supported
FieldServer Mode Nodes Comments
Client 1 Only 1 virtual client per port allowed on multidrop systems.
Server 1 This is a protocol limit, maximum devices that can be polled by Client
2 DRIVER SCOPE OF SUPPLY
2.1 Supplied by FieldServer Technologies for this driver
FieldServer Technologies PART # Description
FS-8915-10
UTP cable (7 foot) for RS-232 use