Faria Instruments SMARTCRAFT MG2000 - Manual (Page 43)

The screen returns to the “Paddlewheel Sensor Installed?” screen.
Press “Up” or “Down” to select another “Edit” mode edit function.
Otherwise,
Press the “Mode” button to return to the “Normal” mode.
Paddlewheel
Sensor
Installed?
Fuel 1 Sensor - Installed?
From the “Edit” mode, using the “Up” or “Down” buttons, select the
“Fuel 1 Sensor Installed?” edit function.
Press and hold the “Up” and “Down” buttons for 2 seconds to select
the “Fuel 1 Sensor Installed?” Follow the instructions below.
Otherwise,
Press the “Up” or “Down” button to select another function or
“Mode” to return to “Normal” mode.
Fuel 1
Sensor
Installed?
This function is used to tell the system whether or not the Fuel 1
Sensor is installed.
Press “Up” or “Down” to scroll through the selections.
When the correct choice is next to the selection arrow “>”, Press and
hold the “Up” and “Down” buttons together for 2 seconds to save
the selection.
Fuel 1
Sensor
No
> Yes
The screen returns to the “Fuel 1 Sensor Installed?” screen.
Press “Up” or “Down” to select another “Edit” mode edit function.
Otherwise,
Press the “Mode” button to return to the “Normal” mode.
Fuel 1
Sensor
Installed?
Fuel 2 Sensor - Installed?
From the “Edit” mode, using the “Up” or “Down” buttons, select the
“Fuel 2 Sensor Installed?” edit function.
Press and hold the “Up” and “Down” buttons for 2 seconds to select
the “Fuel 2 Sensor Installed?” Follow the instructions below.
Otherwise,
Press the “Up” or “Down” button to select another function or
“Mode” to return to “Normal” mode.
Fuel 2
Sensor
Installed?
Page 37