Faria Instruments SMARTCRAFT MG2000 - Manual (Page 38)

Helm Select
From the “Edit” mode, using the “Up” or “Down” buttons, select the
“Helm Select” edit function.
Press and hold the “Up” and “Down” buttons for 2 seconds to select
the “Helm Select.” Follow the instructions below.
Otherwise,
Press the “Up” or “Down” button to select another function or
“Mode” to return to “Normal” mode.
Helm
Select
Press “Up” or “Down” to scroll through the selections.
When the correct choice is next to the selection arrow “>”, Press and
hold the “Up” and “Down” buttons together for 2 seconds to save
the selection.
Select
Helm
Helm 2
> Helm 1
The screen returns to the “Helm Select” screen.
Press “Up” or “Down” to select another “Edit” mode edit function.
Otherwise,
Press the “Mode” button to return to the “Normal” mode.
Helm
Select
Pitot Select
From the “Edit” mode, using the “Up” or “Down” buttons, select the
“Pitot Select” edit function.
Press and hold the “Up” and “Down” buttons for 2 seconds to select
the “Pitot Select.” Follow the instructions below.
Otherwise,
Press the “Up” or “Down” button to select another function or
“Mode” to return to “Normal” mode.
Pitot
Select
Press “Up” or “Down” to scroll through the selections.
When the correct choice is next to the selection arrow “>”, Press and
hold the “Up” and “Down” buttons together for 2 seconds to save
the selection.
Select
Pitot
200 PSI
> 100 PSI
The screen returns to the “Pitot Select” screen.
Press “Up” or “Down” to select another “Edit” mode edit function.
Otherwise,
Press the “Mode” button to return to the “Normal” mode.
Pitot
Select
Page 32