Faria Instruments SMARTCRAFT MG2000 - Manual (Page 42)

Pitot Sensor - Installed?
From the “Edit” mode, using the “Up” or “Down” buttons, select the
“Pitot Sensor Installed?” edit function.
Press and hold the “Up” and “Down” buttons for 2 seconds to select
the “Pitot Sensor Installed?.” Follow the instructions below.
Otherwise,
Press the “Up” or “Down” button to select another function or
“Mode” to return to “Normal” mode.
Pitot
Sensor
Installed?
This function is used to tell the system whether or not the Pitot Sensor
is installed.
Press “Up” or “Down” to scroll through the selections.
When the correct choice is next to the selection arrow “>”, Press and
hold the “Up” and “Down” buttons together for 2 seconds to save
the selection.
Pitot
Sensor
No
> Yes
The screen returns to the “Pitot Sensor Installed?” screen.
Press “Up” or “Down” to select another “Edit” mode edit function.
Otherwise,
Press the “Mode” button to return to the “Normal” mode.
Pitot
Sensor
Installed?
Paddlewheel Sensor - Installed?
From the “Edit” mode, using the “Up” or “Down” buttons, select the
“Paddlewheel Sensor Installed?” edit function.
Press and hold the “Up” and “Down” buttons for 2 seconds to select
the “Paddlewheel Sensor Installed?” Follow the instructions below.
Otherwise,
Press the “Up” or “Down” button to select another function or
“Mode” to return to “Normal” mode.
Paddlewheel
Sensor
Installed?
This function is used to tell the system whether or not the Paddlewheel
Sensor is installed.
Press “Up” or “Down” to scroll through the selections.
When the correct choice is next to the selection arrow “>”, Press and
hold the “Up” and “Down” buttons together for 2 seconds to save
the selection.
Paddlewheel
Sensor
No
> Yes
Page 36