Furuno NAVNET 1933C-BB - Manual (Page 48)

3-4
3.3 RADAR SETUP Menu
After setting up the network, do the following in order to adjust the radar.
Open the INSTALL SETUP menu, and then press the B: RADAR SETUP soft key to display
the RADAR SETUP menu. When the message “RADAR DOES NOT TRANSMIT.
TRANSMIT RADAR?” appears, press the [ENTER] knob to transmit or [CLEAR] key to
cancel transmitting.
RADAR
SETUP
HEADING ADJUST OFF
TOTAL ON TIME 000000.0 h
TOTAL TX TIME 000000.0 h
Page 2
Page 1
▲
A EDIT
ANTENNA TYPE F
HEADING DATA MAGNETIC
ANTENNA ROTATION ROTATE
TUNING OFF
TIMING ADJUST OFF
VIDEO ADJUST OFF
M.B. SUPPRESSION OFF
RADAR ANTENNA HEIGHT HIGH
STC CURVE NARROW
MONITOR MODE OFF
▲
RADAR
SETUP
NEXT
PAGE
E RETURN
PREV.
PAGE
D
E
A EDIT
Radar setup menu