Furuno NAVNET 1933C-BB - Manual (Page 60)

3-16
3.6 Setting up Data Ports
Setup the data ports according to the equipment connected to them as follows.
1. Press the [MENU] key to open the menu.
2. Press the E: SYSTEM CONFIGURATION, C: SYSTEM SETUP and A: PORT SETUP
soft keys.
3. Press the A: GPS/NMEA PORT soft key for DATA 1 port, or B: NMEA PORT soft key for
DATA 2 port as appropriate. One of the following displays appears depending on your
selection.
GPS/
PORT
FURUNO GPS SENSOR YES
OUTPUT FORMAT NMEA0183
Ver 2.0
LAT/LON FORMAT DD˚ MM.MMM'
OUTPUT DESTINATION NO
WIRING INFORMATION
TD-A >1>---WHITE
TD-B >2>---BLUE
RD-A>3>---YELLOW
RD-B>4>---GREEN
+12V >5>---RED
GND >6>---BLACK
FG
>7>---SHIELD
DATA 1 port
WIRING INFORMATION
TD-A >1>---WHITE
TD-B >2>---BLACK
RD-A>3>---YELLOW
RD-B>4>---GREEN
NC >5>
FG >6>---SHIELD
FURUNO GPS SENSOR NO
OUTPUT FORMAT NMEA0183
Ver 2.0
LAT/LON FORMAT DD˚ MM.MMM'
OUTPUT DESTINATION NO
DATA 2 port
NMEA
PORT
E RETURN
A EDIT
SELECT
SNTNC
B
A EDIT
SELECT
SNTNC
B
E RETURN
DATA1, DATA2 PORT menus
4. Select item and press the A: EDIT soft key.
5. Set option referring to the table on page 3-17.
6. To select NMEA data sentences to output, press the B: SELECT SNTNC soft key.
For NETWORK port, select the sentence to output to the network equipment (default: all
OFF).
NMEA Version 2.0
Range and bearing mode: Rhumb line
NMEA Version 1.5
Range and bearing mode: Great circle
SELECT
SNTNC
E RETURN
A ON/OFF
AAM
APB
BOD
BWR
DPT
GGA
GLL
GTD
MTW
RMA
RMB
RMC
VHW
VTG
WPL
XTE
ZDA
HDT
HDG
MWV
TTM --
ON
--
--
--
--
ON
--
--
--
ON
ON
--
ON
--
--
ON
--
--
--
--
AAM
APB
BOD
BWC
DBT
GGA
GLL
GTD
MTW
RMA
RMB
RMC
VHW
VTG
WPL
XTE
ZDA
HDT
HDG
MWV
TTM --
ON
--
--
--
--
ON
--
--
--
ON
ON
--
ON
--
--
ON
--
--
--
--
SELECT
SNTNC
A ON/OFF
E RETURN
NMEA data sentences