Furuno NAVNET 1933C-BB - Manual (Page 25)

1-15
one of the screws of the cable clamping plate.
9. Attach three connectors of the signal cable to respective receptacles as shown below.
to one of the screws
of the cable clamping plate
9-pin connector:
to J801 on MD-9208
4-pin connector:
to J802 on MD-9208
13-pin connector:
to J611 on IF-9214A
Signal cable, antenna unit side
J802
J801
J611
MD-9208
IF-9214A
Cable
entry
RF unit