Furuno FCV-1200LM - Manual (Page 83)

AP-3
*: FCV-1200L only
*: FCV-1200L equipped with EXIF Assy.,
INTERNAL selected at XDCR
CONNECT on the DRAFT SETTING
menu.
PRR LEVEL (0-20, S, 20)
STC (0-10, 0)
GAIN ADJ (-50-+50, +0)
RX BAND* (NARROW, STD, WIDE)
TX PULSE (SHORT1, SHORT2, STD, LONG, MANUAL)
TX/RX
USER-1/2 USER-1
SYSTEM
SCREEN LAYOUT ( )
DISP MODE
ZOOM MODE (BOTTOM LOCK, BOTTOM ZOOM, MARKER ZOOM,
DISCRIM-1/2, DISCRIM-1/3)
PULSE LENGTH (0.2msec-5.0msec, 0.2msec)
USER-2
EXT DEVICE (ETR, TS/OTHER)
DEFAULT SET (NO, YES)
SCREEN LAYOUT (Same as USER-1, default setting: )
DISP MODE (Same as USER-1, default setting:[LF]Zm/Nor+[HF]Zm/Nor)
ZOOM MODE (Same as USER-1, default setting:BOTTOM ZOOM)
HF and LF should be set.
([HF]:Normal, [LF]:Normal, [Ex]:Normal*
[HF]:Zoom, [LF]:Zoom, [Ex]:Zoom*, [Mix]:Normal)
([HF]:Zm/Nor, [LF]:Zm/Nor, [Ex]:Zm/Nor*,
[LF]+[HF], [Ex]+[HF]*, [Ex]+[LF]*, [LF]Zm+[HF]Zm,
[HF]+[Mix], [LF]+[Mix], [H]sub+[HF], [L]sub+[LF])
([LF]+[HF]:Zm/Nor, [LF]:Zm/Nor+[HF], [Ex]+[HF]:Zm/Nor*,
[Ex]+[LF]:Zm/Nor*, [EX]:Zm/Nor+[HF]*, [EX]:Zm/Nor+[LF]*,
[Ex]+[LF]+[HF]*, [LF]+[HF]+[Mix],
[LF]+[H]sub+[HF], [L]sub+[LF]+[HF])
([LF]Zm/Nor+[HF]Zm/Nor)
2
(Continued on the next page)
(From the previous page)