Furuno FCV-1200LM - Manual (Page 64)

3-16
3.9 NAV DATA SETTING Menu
This menu selects source of position data and heading data.
DISP ALM TX/RX USER-1/2 SYSTEM
Indication of speed data.
[-/+]: Change set, [EXIT (knob)]: Exit
NAV DATA SETTING
SPEED INFO : OFF
NMEA VERSION : Ver 2.0
NAV DATA : AUTO
COURSE : TRUE
TLL OUTPUT : OFF
NAV DATA SETTING menu
SPEED INFO
Turns on/off the ship’s speed indication.
NMEA VERSION
Selects NMEA version of external equipment; Ver 1.5, Ver 2.0 or SPECIAL. If you are not sure
of version number try both and select which one successfully receives data. SPECIAL outputs
the depth data with 600 bps.
NAV DATA
Selects source of navigation data (NMEA talker); Loran C, Loran A, Decca, GPS, DR or AUTO.
Select AUTO when more than one talker data is input. The order of priority is GPS, Loran C,
Loran A, Decca DR.
COURSE
Selects heading reference; TRUE or MAG (magnetic bearing).
TLL OUTPUT
Enables/disables output of L/L position to a navigation plotter when the [MARKER/TLL] key is
pressed.