Fostex FD-8 - Manual (Page 117)

117
Maintenance/Specifications
: 8 tracks (via optical adat)
: 2 tracks (via analog)
: 8 tracks
: Maximum 99 tunes
: +/-6%
: 10msec.
: 20Hz ~ 20kHz (typical)
: 90dB (typical)
: 0.008% (at mastering
mode)
Signature : 1/4, 2/4, 3/4, 4/4, 5/4, 1/8, 3/8,
5/8, 6/8, 7/8, 8/8
Tempo : quarter note (1/4 note) = 30 ~ 250
* Input/Output
Connector : RCA pin jack (x2)
Input Impedance : 20k or higher
Reference Input Level : -10dBV
Connector : Optical (x2)
Format : (1) IEC958 Part 3 (S/P DIF), (2)
Alesis Proprietry Multi Channel
Optical Interface (Adat Optical)
* Switch to either (1) or (2) depending on setup.
Connector : DIN 5 PIN (x2)
Format : MIDI
Connector : 6mm phone jack (x1)
* For using optional Model 8051 foot switch)
Connector : D-SUB 25 PIN (x1)
Protocol : SCSI-2, unbalanced
transmission line
Type of transmission : Asynchronous transmission
Connectable number of units : 2
SCSI-ID
: Automatic recognition
* General
: 552 (W) x 110 (H) x 355 (D)
* Including highest protrusion.
: Approx. 5kg
: AC 120V, 60Hz
: AC 230V ~ , 50/60Hz
: 15W
* Specifications and appearance are subject to change
without notice for product improvement.
*A.D.A.C. (Advanced Digital Audio Acoustic Coding)
A.D.A.C. is the next generation digital audio coding technique
maximized for multitrack recording which have been
developed by joint research of Matsushita Electric Industry
Corporation and Fostex Corporation.
* “Adat” and the “Adat symbol” are trademarks of Alesis
Corporation.