Furuno FM-8800D - Manual (Page 84)

4. BASIC SETUP
4-8
4. Rotate the CH knob to choose the call type and press the ENT key. One of
the following display appears depending on the call type selected above.
MESSAGE FILE 1 ENTRY
COAST ID : 00
ROUTINE
CH : NO INFO
CALL TYPE : COAST CALL
ACK REQ
COMM MODE: TELEPHONE
COMM OPTION: NO INFO
MESSAGE FILE 1 ENTRY
SHIP ID :
ROUTINE
CH : 16
CALL TYPE : SHIP CALL
ACK REQ
NAME : NAME :
In case of Coast call In case of Ship call
MESSAGE FILE 1 ENTRY
GROUP ID : 0
CALL TYPE : GROUP CALL
NO ACK REQ
MESSAGE FILE 1 ENTRY
COAST ID : 00
COMM OPTION: NO INFO
TEL
:
CALL TYPE : PSTN CALL
NAME : NAME :
ACK REQ
In case of Group call In case of PSTN call
COMM MODE: DUPLEX TP
REGIST ERASE REGIST ERASE
REGIST ERASE REGIST ERASE
ROUTINE
CH : 16
COMM MODE: TELEPHONE
COMM OPTION: NO INFO
COMM MODE: TELEPHONE
COMM OPTION: NO INFO
Note1: The communication priority is ROUTINE only.
Note2: The group ID will be registered automatically after a group call message
file is saved.
Note3: If you register a group call, its group ID becomes your own group ID.
5. Press the ENT key and key in each ID followed by the ENT key.
6. COMM MODE is selected; press the ENT key.
DATA
TELEPHONE
7. Choose TELEPHONE or DATA as appropriate followed by pressing the ENT
key. The COMM OPTION field always shows NO INFO.
8. Choose CH and press the ENT key. The following window appears.
SELECT CH
MANUAL