Furuno FM-8800D - Manual (Page 69)

3. DSC OPERATION FOR NON-DISTRESS CASES
3-23
3.6.2 Manual reply
1. When a polling request call is received and the setting of POLLING CALL on
the AUTO ACK menu is OFF or the ACK key is set to show MANUAL ACK
on the display, the display changes as shown in the illustration below and the
audio alarm sounds.
Polling request
call received.
FROM : 123456789
ROUTINE
KIND : POLLING
COMM OPTION : NO INFO
ACK REQ
CANCEL ALARM
2. Press the CANCEL key to silence the alarm. The display changes as below.
** Received Message **
APR01/04 12 : 34 ECC : OK
POLLING CALL
ROUTINE
KIND : POLLING
COMM OPTION : NO INFO
ACK REQ
FROM : 123456789
PRESS ENT TO ACK.
3. To respond to the call, press the ENT key. The following pop-up window
appears.
ANSWER
NO ANSWER
4. Choose ANSWER by the CH knob and press the ENT key.
5. Press the CALL key more than three concords to send the polling
acknowledge call. Then the standby display appears.
To send no reply, choose NO ANSWER and press the ENT key twice to
return to the standby display.