Fostex MR-8 - Manual (Page 67)

67
MR-8 Owner’s Manual
flashing
" Source Track " selects the exchange source track(s),
while " Dest. Track " selects the exchange destination
track(s).
The current position information is shown at the
top of the screen (shown in Bar/Beat base in the
screen example below).
5) Use the [CURSOR / ] keys to select the source
track(s) to be exchanged.
You can select from among mono tracks (1 through
8) and stereo pair tracks (1/2, 3/4, 5/6 and 7/8).
6) Use the [CURSOR ] key to move the cursor to
the option for "Dest. Track".
7) Use the [CURSOR / ] keys to select the
destination track(s).
If you select a mono track for the exchange source
in step 5 above, you can select a mono destination
track. If you select stereo pair tracks for the
exchange source in step 5 above, you can select
stereo pair destination tracks.
8) Use the [CURSOR ] key to move the cursor to
"ENTER" on the screen, then press the [ENTER]
key.
The display shows " Please Wait! ", immediately
followed by " Completed! " when the MR-8 completes
the exchange operation.
If you want to cancel the exchange opera-
tion, move the cursor to "
[CANCEL] " on the
screen, then press the [ENTER] key.
9) Press the [ENTER] key.
The display returns show to the screen in which
"
Change Track " is highlighted.
10) Press the [MENU] key to exit the menu mode.
If you are not satisfied with the result, press
the [UNDO/REDO] key to undo the opera-
tion (see page 62).
You cannot select the same track(s) for the
exchange source and destination.