FujiFilm 40002 - Manual (Page 25)

3. INSTALLATION
23
3.4.2.1 Installing to the Server
1. When running Windows 2000 on the server computer, install
the printer driver to the server, by doing Steps 1. through 20. in
"3.4.1 For local printing."
The following appears.
Then continue the installation by following the procedures
described below.
2. Select [Share as].
Set a share name. The default share name is currently displayed.
You may select any printer to replace the default printer.
After defining the share name, click the
[OK] button.
The following appears.
3. Enter the location of the printer in the [Location] field and the
description of the printer in the [Comment] field, or click the
[Next] button without entering anything.
4. Continue installation of the printer driver by doing the procedure
described in “3.4.1 For local printing” from Step 22. onward.
3.4.2.2 Installing to a Client Computer
1. Start up the server computer.
The printer driver should already be installed on the server, and
the server and client should be linked across a network.
2. Click to select [Settings] > [Printers] from the [Start] menu.
The [Printers] folder window is displayed.
3. Double-click the [Add Printer] icon.
The [Add Printer Wizard] dialog box is displayed.
4. Click the [Next] button.
The following appears.