FujiFilm 40002 - Manual (Page 17)

3. INSTALLATION
15
4. Select [My Computer] and click the [Next] button.
The following appears:
5. Click the [Add Port...] button.
The [Printer Ports] dialog box appears:
6. Click the [New Monitor...] button.
The [Installing Print Monitor] dialog box is displayed.
7. Enter the following location in the [Copy files from:] field.
For the CE type, enter:
E:\Driver\PG3500\WinNT40\English\CE (for 3500)
E:\Driver\PG4K2_4500\WinNT40\English\CE (for 4000
2 /
4500)
(* if your CD-ROM drive is E: drive)
For the UC type, enter:
E:\Driver\PG3500\WinNT40\English\UC (for 3500)
E:\Driver\PG4K2_4500\WinNT40\English\UC (for 4000
2 /
4500)
(* if your CD-ROM drive is E: drive)
Click the
[OK] button.
The following appears.
8. Verify that [FUJIFILM PICTRO TCP Port] is displayed in the
[Available Printer Ports:] field, and then click the [New Port...]
button.
After a file copy operation is performed, the following dialog
box opens:
9. Specify the port name as directed below:
Enter a numerical value between 1 and 99 to specify the port
name. Although the default port name (numerical value) is
displayed, you can change it by entering a new port name
(numerical value).
When the port name is determined, click the [OK] button.
The following dialog box then opens: