Frymaster COOL ZONE SERIES KSCF18G - Manual (Page 41)

KSCF18G COOL ZONE SERIES GAS FRYERS
CHAPTER 5: FILTRATION
5-10
5.3 Filter Operations (cont.)
6. Obstructions in the oil return lines often
cause the circuit breaker to trip. Ensure the
correct oil return valve is open. The yellow
oil return valve handle corresponding to the
frypot being filtered should be pushed all the
way into the OPEN position.
7. Close the red drain valve by pushing the
handle to the left until it stops. Ensure the
handle is completely closed so that the
microswitch is engaged (the fryer will not
operate unless the computer senses a closed
microswitch circuit). The frypot will begin to
fill with filtered oil/shortening.
8. Allow the filter to pump bubbles into the
fryer for approximately 10-15 seconds to
ensure the evacuation of all oil/shortening
from the filter pan and oil return lines.
If the circuit breaker trips, ensure the yellow
handle is pushed all the way to OPEN.
After filtering is complete, close the red drain
handle to start refilling the frypot.
Bubbling oil indicates that air is flowing through
the return lines and all oil/shortening has been
evacuated from the lines.