Fostex FR-2 - Manual (Page 8)

8
FR-2 Field Memory Recorder
MODEL FR-2
FIELD MEMORY RECORDER
FOSTEX CO.
INPUT: 12VDC
SERIAL NO.
MADE IN CHINA
• Do not let water or other liquid, or metal objects such as pins,
accidentally enter the inside of the unit (especially inside of the card
slots) because this may lead to electric shock or damage. Should water
enter the inside of the unit, turn off the power, unplug the AC adaptor
and remove batteries, and consult your dealer or the nearest FOSTEX
service station.
• Do not drop the unit or give it a strong shock. The internal circuits,
display, panels may be damaged. Although the unit is designed to
operate outside, handle the unit with great care because it is a
precision machine.
• To prevent possible electric shock and damage to the unit, do not
remove the cover or reach the inside of the unit.
• When using the supplied carrying belt, to prevent the unit from
dropping accidentally, make sure that it is attached to the unit
correctly.
• Do not give a strong shock to the LCD display. The liquid used inside
the LCD display is toxic. If the liquid is spilled, do not suck it in. If it is
stained to your hand or skin, wash immediately with plenty of water.
The model name, power requirement and
serial number of the unit are labeled on
the bottom panel.
Precautions on installation
• Do not install the unit in the following conditions.
• in a extremely hot or cold place
• in a moist place
• in a shaky or unstable place
• in a dusty place
• in a strong magnetic field or near a device which generates a
magnetic field
• in the direct sunshine
• in the direct rain or water
• Notes on moisture condensation
When you bring the unit from a cold place to a warm place, moisture
may condense on the drive, display, panels, etc. In such a case, leave
the unit for a while until it warms up and evaporates any moisture.