Fostex FR-2 - Manual (Page 104)

104
FR-2 Field Memory Recorder (Chapter 8: Main specifications)
*0 dBu=0.775 Vrms, 0 dBV=1 Vrms.
Reference level: -20 dB
Inputs/Outputs
ANALOG IN [L (MONO)/R]
Connectors: XLR-3-31 type (balanced, pin 2 hot)
Input impedance:
More than 6k Ω
Nominal input level: 4dBu
Maximum input level: +24 dBu (TRIM: +4dBu, at the prefader stage)
Input impedance:
More than 6k
Ω
Nominal input level: -60 dBu
Maximum input level: -40 dBu (TRIM: +4dBu, at the prefader stage)
Phantom power: 48 V
ANALOG OUT [L (MONO)/R]
Connectors: RCA type (unbalanced)
Applicable load impedance: More than 10k Ω
Nominal output level: +4 dBu
PHONES
Connector: 1/4" stereo phone jack
Applicable load impedance: More than 32 Ω
Maximum output power: 50 mW + 50 mW (32 Ω load)
DIGITAL IN/OUT (176.4 kHz and 192 kHz FS are not supported.)
Connector:
: XLR-3-31 type (balanced, pin 2 hot)
: XLR-3-32 type (balanced, pin 2 hot)
Format:
: IEC 60958 (S/P DIF) or IEC 60958 (AES/EBU), auto selection
: IEC 60958 (S/P DIF) or IEC 60958 (AES/EBU),
The format of the digital output signal can be selected in the MENU mode.
USB (for PC connection)
Connector: USB 1.1 (Series “B” Receptacle)
Pin assignment: 1: VBUS, 2: D-, 3: D+, 4: GND
USB (for USB keyboard connection)
Connector: Series “A” Receptacle
Pin assignment: 1: VBUS, 2: D-, 3: D+, 4: GND
MONITOR SPEAKER
Maximum output level: 1 W