Chapter 6: menu mode – Fostex FR-2 User Manual
Page 10

10
FR-2
Field Memory Recorder
Locate
Used to locate to a desired cue point directly.
Rename
Used to rename a cue point.
Edit
Used to edit a cue point.
Delete
Used to delete a cue point.
1) Cue menu (including menu items regarding cue points)
Select
Used to select a file for playback.
Rename
Used to rename a file.
Delete
Used to delete a file.
Protect
Used to select file protection on/off setting.
2) File menu (including menu items regarding audio files)
Restore
Used to restore a deleted file.
Select
Used to select the current drive.
Optimize
Used to optimize a memory card.
Format
Used to format a memory card.
Volume Label
Used to edit a volume label of a memory card.
3) Disk menu (including menu items regarding a memory card)
Disk Info.
Shows the current memory card information.
File Name Mode
Used to select the file name mode.
Default Scene Name
Used to set the default scene name and take number for a file name.
Adjust Real Time Clock
Used to adjust the real time clock.
Speaker Mute
Used to select speaker mute function on/off setting.
4) Setup menu (including menu items for FR-2 preferences, etc.)
Error Tone
Used to set the error tone output condition.
Peak Hold Time
Used to set the peak hold time of the level meters.
Pre Rec Time
Used to set the time length of audio stored in the buffer when the
Pre rec mode is set to ON.
Remain Display
Used to select the remaining display readout.
Digi Out Type
Used to select the digital output signal format.
Battery
Used to select the battery type.
Keyboard
Used to select the USB keyboard type.
5) USB mode menu (enables PC connection for file transfer)
Version
Shows the current ROM version.
Init Setup
Used to initialize all Setup menu item settings to the default (when
the unit is shipped).
Chapter 6: MENU mode
This chapter describes details about each menu items on each menu in the
MENU mode.
Five menus are available in the MENU mode. Each menu includes various
menu items as shown below. (Note that menu items may change when the
FR-2 is upgraded.)