Initial setup – FOCUS Enhancements FS-C User Manual
Page 52
FS-C Using with a Computer
36
To move video files from the FS-C to a computer:
• Connect the FS-C’s
Computer I/O
1394 port directly to a
computer with an active OHCI compliant IEEE-1394
FireWire port and the necessary FireWire disk drive
drivers.
• Use the FS-C HDD Bypass mode, refer below for more
information.
The FS-C is compatible with any computer system that can
read FAT 32 volumes, such as Windows 98SE/ME/2000/XP
and Mac OS9/OS10.
Initial Setup
1.
Connect the FS-C through its
COMPUTER I/O
1394 port to the
computer system using a standard 6-pin to 6-pin FireWire cable.
2.
Enter HDD mode and enable DD Drive.
This step is required before mounting the FS-C to a computer.
• On the FS-C go to the
HDD
screen.
• Select
DD Drive
and
Right
arrow to
Connect
screen.
• Press
Enable
function button.
Refer to the section,
3.
Connect power to the drive if necessary.
4.
Consult the computer’s documentation for more information.
For More Information
Go to the FOCUS Enhancements' website (www.focusinfo.com) for
more compatibility information.