FUJITSU PLASMAVISION PDS4229W User Manual

Page 26

• Adjusting Contrast (Contrast)

Any value between -30 and +30 can be selected.

: Higher contrast

: Lower contrast

Press

to store.

• Adjusting Screen Brightness (Brightness)

Any value between -60 and +60 can be selected.

: Brighter screen

: Darker screen

Press

to store.

• Adjusting Color Darkness (Color)

Any value between -60 and +60 can be selected.

: Lighter colors

: Darker colors

Press

to store.

• Adjusting Tint (Tint)

Any value between -30 and +30 for [

], and -60 and +60 for [

] can be selected.

: More greenish colors

: More purplish colors

Press

to store.

• Adjusting picture Sharpness (Sharpness)

Any value between -16 and +16 for [

], and -4 and +4 for [

], can be selected.

: Sharper pictures

: Less sharp pictures

Press

to store.

• Making gamma correction(Gamma)

You can use this option to make a dynamic gamma correction suitable for still or motion pictures.

Each time you press or , one of the available choices appears in the following sequence:

Dinamic 1, 2, 3:

Suitable for watching a motion picture.(Use either of better picture quality.)

Static:

Suitable for watching a still picture.

Press

to store.

* Can select Static only in RGB mode.

• Adjusting Color Temperature (Color temp.)

Use or

to specify a desired color temperature. Each time you press or

, one of the available choices appears in the following sequence:

Warm:

More reddish colors

Standard:Standard color temperature

Cool:

More bluish colors

User:

User Color Temp. setup

• Setting User Color Temp. (User Color Temp.)

Can set up when User is selected in Color Temp.

Press

to select Red, Green or Blue and press or

to make adjustment in the range

of 0 to 255.

* Color Temp. setup is switched to User. The initial value of User Color Temp. is adjusted

individually at the factory.

* On-screen information disappears if you do not take any action for about 60 seconds.

* The following abbreviations used in this document represent input modes in which you can make adjustments:

: Video mode,

: S-video mode,

: Comp.video mode,

: RGB-PC mode,

: Decoder mode

User Color Temp.adjustment screen