FUJITSU PLASMAVISION PDS4229W - Manual (Page 23)

22
HOW TO USE MENUS (Continued)
Others(1/2) Menu screen
Option
(1) DPMS
(2) Screen Orbiter
(for RGB)
(3) Input Priority
(4) Monitor No.
(5) Direct Setting
(for RGB)
(6) Code Setting
(for RGB)
(7) White Screen
(for RGB)
(8) Exhibitation Mode
(9) Installation
(10) Key Lock
(11) Information
Function
Specifies time before
DPMS starts.
Can specify the background
color when specifying time.
Sets up screen orbiter.
Specifies input mode of
highest priority.
Selects display number.
Selects input signal.
Specifies and displays type
of input signal directly.
Sets up to display white
over the entire screen.
Sets up Exhibition mode.
Sets up whether horizontal
or vertical installation.
Locks the main unit button.
Displays system operation
status.
Operation
Display DPMS screen and press
or to select an option.
Use or for switching.
Can specify background by
setting time to other than Off.
Press
to store.
Display the “Screen Orbiter”
adjustment screen and use
or
to select an option.
Use or to switch between
available choices for the
selected option.
Use or for switching.
Use or for switching.
Use or for switching.
Display Code Setting screen
and press
or to select an
option.
Select Manual to set up
Parameter.
Use or for switching.
Use or for switching.
Use or for switching.
Use or for switching.
Display the “Information”
screen.
Range
Time
Off (disabled)/1 min./
15 min./45 min./60 min.
Background
Black/White
Mode/Time
Off (disabled)
Time (every 1 hr)
Mode (every time mode is
switched)
Moving area
Min.(moves in small range)
Std.(moves in moderate
range)
Max. (moves in wide range)
Off/RGB/Video/S-video/
Comp.video
0 (no setup)
1/2/3/4
Auto/VGA/WVGA/480P/
XGA
Auto/Manual
On /Off(disabled)
On (Exhibition mode)/
Off(disabled)
Horizontal/Vertical
On (Key Lock)/
Off(disabled)
Display only
Others Menu
Others Menu screen is divided into the following two screens.
Others(2/2) Menu screen