Furuno DD-80 - Manual (Page 103)

C-11
Setting DATA 4 to Data Output
1. Press [MENU], [9] and [5] to show the DATA4 I/O SETUP menu.
DATA 4. Level RS232C RS422
Data Out Com. DGPS
To Next Page
DATA 4 I/O SETUP 1/2
MENU : Escape ENT : Enter
: Select
Appears only when external
DGPS receiver is used.
DATA 4. Level RS232C
Figure 4-2 DATA4 I/O SETUP menu
2. Press ▲ or ▼ to select Level.
3. Press ◄ or ► to select level of external equipment; RS-23C or RS422.
4. Press the [ENT] key.
5. Press ◄ or ► to select Out.
6. Press ▼ to go to the next page to show the DATA I/O SETUP menu.
To Previous Page
Talker ID GP LC DE
Output Data (00-90 sec) 81%
DATA 4 I/O SETUP 2/2
MENU : Escape ENT : Enter
Data Fmt. V1.5 V2.0 IEC
1. AAM:00 APA:00 APB:04 BOD:00
2. BWR:00 BWW:00 GGA:00 GLL:01
3. RMB:01 RMC:01 VTG:01 WCV:01
4. WNR:00 WPL:00 XTE:00 ZDA:01
5. GNS:00 ZTG:01 Rnn:00 RTE:00
Figure 4-3 DATA4 I/O SETUP menu
7. Follow “DATA 1 output setting” from step 2.