FUJITSU ErgoPro m664 - Manual (Page 46)

ErgoPro m664-series PC Specialist's Handbook
Page 4-2 Edition 1 - Release 1 - March 1998
BIOS
The system BIOS is always shadowed. The system is stored in a Flash RAM, thus the BIOS is field upgradable
with a floppy.
At boot-up the BIOS version is shown on the screen. The BIOS information message is displayed indicating the
System BIOS version and unit ID (machine identifier) :
PhoenixBIOS 4.0 Release 6.0
Copyright 1985 - 1997 Phoenix technologies Ltd.
All Rights Reserved
4A4LL0X0.86A.0015.P05.9712111454
The BIOS IDentification :
PC-type Unit ID BIOS Version
m664-series 4A4LL0X0.86A.0015.P05 4A4LL0X0.86A.0015.P05
Larger than 8.4 GB HDD BIOS support
The system BIOS supports, and recoqnises larger than 8.4 GB Hard Disks.
Shadow option proms
The video BIOS and ROMs on add-on boards can be shadowed, if shadowing is supported by the add-on board.
Drivers
Pre-installed Windows NT 4.0 Workstation in m664-series include all required drivers, f.eg. graphics (AGP,
PCI), add-on board audio, LAN, and preparation for the SCSI.
Original Operating System CD-media of Windows NT 4.0 does not include all required drivers for devices used
in ErgoPro m664-series. Latest drivers can be obtained from
•
Fujitsu ICL Computers web-site (i.e. http://www.fujitsu-computers.com, or it’s mirror sites
http://www.fujitsu.se or http://www.fujitsu.fi)
•
GENESIS
•
Indigo CD, volume 2 release 5 (1997) or newer
•
Drivers and Utilities CD for ErgoPro m664-series
Utilities
Pre-installed Windows NT 4.0 Workstation in m664-series does not include ErgoPro specific utilities, but it
includes F-Prot AntiVirus Toolkit and Intel’s LANDesk Client Manager (i.e. the DMI 2.0 client s/w).
Original Operating System CD-media of Windows NT 4.0 does not include ErgoPro specific utilities that are
used in ErgoPro m664-series. ErgoPro specific utilities can be obtained from
•
Drivers and Utilities CD for ErgoPro m664-series
rFlash.exe
This tool is not availablbe for the ErgoPro m664-series.
rSetup.exe
This tool is not availablbe for the ErgoPro m664-series.