FUJITSU ErgoPro m664 - Manual (Page 43)

PC Specialist's Handbook ErgoPro m664-series
Edition 1 - Release 1 - March 1998 Page 3-15
Exit menu
Exit Saving Changes
Exits and saves the changes in CMOS RAM.
Exit Discarding Changes
Exits without saving any changes made in Setup.
Load Setup Defaults
Loads the default values for all the Setup options.
Load Custom Defaults
Loads the custom defaults for Setup options.
Save Custom Defaults
Saves the current values as custom defaults. Normally, the BIOS reads the Setup values from flash
memory. If this memory is corrupted, the BIOS reads the custom defaults. If no custom defaults are set,
the BIOS reads the factory defaults.
Discard Changes
Discards changes without exiting Setup. The option values present when the computer was turned on are
used.